Philips HomeRun Aqua 7000 Serie Manual De Instrucciones página 14

English
16
How your robot cleans
Routine Description
Regular Regular cleaning is intended for your normal daily cleaning routines. The robot cleans each
cleaning room according to the settings you specified and saved in the cleaning plan. If the
environment is not recognized, the robot maps the environment and simultaneously
vacuums it (the robot does not mop in this case). After completion, it returns to the station.
Custom Custom cleaning can be used to have the robot perform cleaning actions at unique
cleaning occasions. You can customize the cleaning routine of your robot to your wishes. You can
set the following three options.
- Room: the robot cleans one or more rooms in an order you specify.
- Zone: the robot cleans a zone in a room you specify
- Spot: the robot cleans in a square of 1.5 by 1.5 meter in a specific spot in your house
that you want to have cleaned.
robot to clean.
After selecting one of the above options, you can select a cleaning mode and fine-tune
your cleaning preferences and advanced settings.
Set cleaning preferences, advanced settings and cleaning order
Cleaning modes
Mode Description
Wet & dry The robot vacuums and mops the floor at the same time. This mode is intended for
regular cleaning of hard floors.
floors, set the mopping wetness level in the app to the lowest level.
Dry The robot only vacuums the floor. This mode can be used for areas that shouldn't be
mopped.
Quiet The robot cleans with minimal noise. The suction power is lowered and the voice
alerts are muted.
In the app, the following cleaning routines can be selected:
Note: with spot cleaning, place the robot in the middle of the square you want the
In the app, you can select five different cleaning modes for each room. These are
standard modes that can be used in most situations. You can customize your
cleaning mode by fine-tuning cleaning preferences and advanced settings.
IMPORTANT: For mopping sensitive hard floors, such as parquet