Philips HomeRun Aqua 7000 Serie Manual De Instrucciones página 15

Cleaning modes
Intensive The robot vacuums and mops the floor at the same time and at full power. This mode
is intended for thorough cleaning of small areas.
passes the area 5 times, so the cleaning time and battery usage will increase
significantly.
Individual For this mode you can select all expert settings from scratch.
Setting Description
Suction power Change the suction power:
-
-
-
-
Water level Determine the flow rate that is pumped from the electric water tank onto the mop:
-
-
-
-
Cleaning path Specify the number of cleaning passes. One pass is sufficient for normal cleaning. It is
sequence possible to program the robot to make two or even five passes for intensive cleaning
of stubborn dirt. It is recommended to select this option only for specific cleaning
areas as it impacts cleaning duration.
Setting Description
Mop vibration Turn the mop vibration on or off. The vibrations gently yet effectively scrub the floor
to loosen dirt and footprints.
Y-pattern mopping Change the mopping pattern to Y-pattern. By mopping in a Y-pattern, the robot will
leave less watermarks and traces. Note that the cleaning time will be a bit longer
than normal mopping.
Note that it is not recommended to clean large areas in this mode. The robot
Cleaning preferences
For each cleaning mode, you can fine-tune the following cleaning preferences:
Eco: for efficient cleaning with low energy consumption and low noise level.
Normal: for regular cleaning and effective removal of fine dust on hard floors
with optimal balance between power and efficiency.
High: for a thorough cleaning of large floors. Can clean more on a single charge
than max mode.
Max: ideal for removing large dirt like pet hairs or crumbs. The strong suction
power removes fine dust particles hidden deep inside carpets and crevices.
Off: Switch off the mopping wetness for uncoated wooden floors and carpets.
Low: to mop a sensitive floor e.g. parquet. The combination of vacuuming and
mopping removes more fine dust than vacuuming alone.
Middle: optimal for a regular wet & dry cleaning. The mop removes superficial
dirt and bacteria to keep your home sanitized and healthy.
High: for an effective removal of footprints for a spotlessly clean home. It is
recommended to combine this setting with mop vibrations turned on and 5
cleaning path repetitions for an intensive cleaning.
Advanced settings
For each cleaning mode, you can fine-tune the following advanced settings:
English
17