BSV PRO200V2 Manual De Usuario página 49

4.1.2.2.1- Chlorine production
Configuration of the maximum production of chlorine.
From 0% to 100% Press "OK" and use the arrows   to change the value.
Press "OK" to confirm the adjustment.
Note: Chlorine production may be limited regardless of the operation mode
(manual, automatic...) that is selected.
4.1.6.2- Adjustment of the set value (Max. mV/PPM)
If free chlorine or ORP probe is installed (OPTIONAL)
In this case, adjust the value in ppm/mV as required. A value between 1ppm
and 1.5ppm or 700-750mV is correct.
NOTE: if working in automatic, you can also adjust the production percentage
from 0% to 100%,
4.1.2.2.3- Super chlorination
Select this option if you require super-chlorination of your swimming pool,
bearing in mind if filtration pump is disconnected, this mode will stop.
4.1.2.2.4- Free chlorine probe calibration
If you have a free chlorine probe, a menu will appear for you to calibrate it.
Once the reading has stabilized and the chlorine measurement has been taken
with DPD1,
adjust the PPM value provided by the DPD1 measurement.
4.1.2.3- pH menu
You can access the pH menu from the main menu by pressing OK
49 / 53
Manual PRO200V2 V2