Zipper ZI-STE3000IV Instrucciones De Servicio página 36

14.2.3 Air filter
NOTE:
Never operate the machine without or a not maintained air filter!
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
• Unscrew the dipstick (4).
• Fill in new engine oil and check the engine oil level with the
dipstick (4) (regarding engine oil type and oil tank capacity
see technical data).
• If the oil level is correct (5), reinsert the dipstick (4).
• Remove oil residues with a cloth.
• Screw the cover (1) back on.
• Place the machine on an even surface and start the engine.
If there is sufficient engine oil filled in, the low oil alarm will be
not activated.
• Loosen the screws (2) and remove the cover (1).
• Loosen the screws and remove the cover of the air filter (3).
• Take out the air filter (4).
• Clean the air filter with soapy water, then rinse with clear wa-
ter and let it dry thoroughly before reassembling.
• The reassembly is done in reverse order.
36
ZI-STE3000IV