Publicidad
Idiomas disponibles
Idiomas disponibles
1. Introduction
1. Introduction
Thank you for choosing this EVBox Dynamic Load Balancing Kit. Refer to the
installation manual of your charging station to check whether your charging
station has a Dynamic Load Balancing (DLB) feature.
This Installation Manual describes how to install and use dynamic load
balancing. You must carefully read the safety information before you start.
1.1. Scope of the manual
Keep this manual for the entire life cycle of the product.
The installation instructions in this manual are intended for qualified installers
who can assess the work and identify potential danger.
All EVBox manuals can be downloaded from www.evbox.com/manuals.
Disclaimer
This document is drafted for information purposes only and does not
constitute a binding offer or contract with EVBox. EVBox has compiled this
document to the best of its knowledge. No express or implied warranty is
given for the completeness, accuracy, reliability, or fitness for the specific
purpose of its content and the products and services presented therein.
Specifications and performance data contain average values within existing
specification tolerances and are subject to change without prior notice.
EVBox explicitly rejects any liability for any direct or indirect damage, in the
broadest sense, arising from or related to the use or interpretation of this
document.
© EVBox. All rights reserved. EVBox name and the EVBox logo are
trademarks of EVBox B.V or one of its affiliates. No part of this document
may be modified, reproduced, processed, or distributed in any form or by
any means, without the prior written permission of EVBox.
EVBox Manufacturing B.V.
Kabelweg 47
1014 BA Amsterdam
The Netherlands
help.evbox.com
EN
7
Publicidad
