EVBOX Dynamic Load Balancing Kit Manual De Instalación página 21

4. Installation instructions
8. Mount the current sensors on the
electric wires. The direction arrow on
the current sensor must point from
the electricity meter to the charging
station.
DLB adapter terminal
1
2
3
WARNING
Mounting the current sensors on electric wires without insulation can result
in damage to the product, which may cause injury or death.
• The current sensors must be mounted only on electric wires with basic
or reinforced insulation.
CAUTION
Mounting the current sensors on electric wires in the wrong order will cause
the dynamic load balancing to not function properly.
• Make sure that the current sensors are mounted on electric wires in the
correct order.
• If phase rotation is used for station installation, make sure that the
current sensors match the phase rotation.
9. Use cable ties to route and secure the current sensor wires in the power
supply cabinet.
Phase
L1
L2
L3
EN
17