EVBOX Dynamic Load Balancing Kit Manual De Instalación página 15

3. Product features
3. Product features
The EVBox Dynamic Load Balancing Kit allows the charging station to
monitor the power consumption of other electrical devices that use the same
power source. When other electrical devices consume power, the charging
station calculates the remaining capacity that is available for charging based
on the inputs from the DLB Kit. The charging station reduces the charge rate
to ensure that the total power consumption stays within the preset limits.
3.1. Description
3.2. Technical specifications
Feature
Maximum circuit voltage
Maximum output current
Output voltage
Primary current
Working frequency
Normal environmental conditions
Maximum installation altitude
Operating temperature
Storage temperature
DLB adapter
1.
The DLB adapter routes
sensor signals to the
charging station through a
network cable.
Current sensors
2.
A current sensor measures
the current flowing in a
power supply phase wire.
Description
230 V ± 10% or 400 V ± 10%
100 mA
300 mV peak
up to 100 A *
50/60 Hz
Indoor use
3000 m above sea level
-20 °C to +50 °C
-40 °C to +80 °C
EN
11