EVBOX Dynamic Load Balancing Kit Manual De Instalación página 24

EN
4.3. Configuration and testing
WARNING
Risk of electric shock, which can cause severe injuries or death. Only a
qualified electrician is permitted to use the EVBox Install app to configure
the charging station.
1. Download and install the EVBox
Install app on your smartphone or
tablet.
2. Open the EVBox Install app on your
smartphone or tablet and connect to
the charging station. The charging
station-specific information required
for station configuration is on the
sticker stored with the charging
station documentation.
Note
Make sure that the EVBox Install app
is up-to-date and that the charging
station is running the latest firmware.
3. Follow the configuration instructions in the EVBox Install app.
After the configuration, the EVBox Install app must show a reading from each
current sensor. If a reading is not shown, see
20
4. Installation instructions
Troubleshooting on page 21.