Hillrom O-AWLH Instrucciones De Uso página 13

INSTRUCTIONS FOR USE
TO ADJUST HEIGHT:
Unlock the Table Socket and position support rod to the desired height. Retighten
the table socket to secure Legholder in new position.
TO SETUP FOR USE ON OPPOSITE LEG:
Loosen the knob under the boot and slide the boot off the Mount Rod. Loosen the
Boot Clamp Handle and rotate the mount rod 180° and retighten the handle. Place
the Legholder assembly onto the accessory clamp on the other side of the table.
Slide the Boot assembly onto the Mount Rod and tighten the handle.
3.3 Device controls and indicators:
Controls and indicators of this device are described within the Setup instructions.
3.4 Storage, Handling and Removal Instructions:
3.4.1 Storage and Handling:
The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2 Removal Instruction:
a. Safely remove the patient's legs from the Arthroscopic Well Leg Holder
b. Unmount the Arthroscopic Well Leg Holder rod from the socket style clamp.
c. Remove clamp from the surgical table rail.
3.5 Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user of
the device shall first contact Hill-Rom Technical Support.
3.6 Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the device
contact us using the information from the contact details section (1.3).
Document Number: 80028145
Version C
Page 13
Issue Date: 25 MAR 2020
Ref Blank Template: 80025117 Ver. F