Publicidad
Idiomas disponibles
Idiomas disponibles
Product Overview
EN
Base Station
Upper Cover
Handle
Handle
Dust Cabinet
Cover
Washboard
Water
Tank Clip
Float Ball
Used Water Tank
Clean Water Tank
8
Base Station
Slot
Auto-empty
Vent
Water Tank Clip
Water Pipe
Filter
Floater
Before Use
1. Remove the protective strips
Status Indicator
Solid white: The base station is
connected to power
Blinking Orange: The base
station has an error
Filter
Signaling Area
Charging Contacts
2. Install the Side Brush and the Mop Assembly
Automatic Water
Adding Inlet
Side Brush Clip
Note: Install the side brush until it clicks into place.
3. Connect to an Electrical Outlet
Place the base station in a location that is as open as possible with a good Wi-Fi
signal. Insert the power cord into the base station and plug it into the socket.
Firmly insert the power
cord upwards until the
I：ON
indicator turns on.
O：OFF
4. Place the Base Station
Remove any objects that are closer than 1.5 m from the front, 1 m from the top,
and 0.5 m from either side of the base station.
> 1 m
> 0.5 m
> 0.5 m
> 1.5 m
Note:
·
Make sure that no objects might block the signaling area.
·
To prevent water stains from wetting wood floors or carpets, placing the base
station on tile floors or marble floors is recommended.
EN
9
Publicidad
