Publicidad
Idiomas disponibles
Idiomas disponibles
Before Use
EN
5. Place the Robot
Press and hold the
button on the robot for 3 seconds to turn it on. Place
the robot onto the base station with the mop assembly facing toward
the washboard. Then you will hear a voice notification when the robot
successfully connects to the base station and starts charging. After the robot
is fully charged, the status indicators on the robot and the base station will
remain lit for 10 minutes and will then dim.
Note: It is recommended to fully charge the robot before its first use. When the
robot cannot be turned on after the battery is depleted, manually connect the
robot with the station to charge it.
10
6. Add Water to the Clean Water Tank
Take out the clean water tank from the base station, and fill it with clean
water up to the max water line. Then install it back into the base station.
MAX Water Line
Note:
·
Do not add hot water to the water tank, as this may cause the tank to become
deformed.
·
Do not add any liquid other than the officially-approved cleaner to help prevent
base station malfunction.
Connecting with Dreamehome App
This product works with the Dreamehome App, which can be used to
control your device.
Scan the QR code on the robot, or search " Dreamehome" in the app store to
download and install the app.
2. Add Device
Open the Dreamehome App, tap "
" in the upper right corner, and scan
the QR code above again to add "DreameBot L10 Ultra". Please follow the
prompts to finish the Wi-Fi connection.
My Devices
Note:
Scan QR code on the device
• Only 2.4GHz Wi-Fi is supported.
• Due to upgrades in the app software, the actual operations may be different
Add Device
from the statements in this manual. Please follow the instructions based on the
Scan QR code to connect.
current app version.
3. Reset Wi-Fi
Simultaneously press and hold the buttons
and
until you hear a voice
prompt saying, "Waiting for the network configuration." Once the Wi-Fi
indicator is blinking slowly, the Wi-Fi has been successfully reset.
Wi-Fi Indicator
· Blinking slowly: To be
connected
· Blinking quickly: Connecting
· On: Connected
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add
the device again.
EN
11
Publicidad
