Nanosonics trophon EPR Manual Del Usuario página 25

12. Ultrasound probe – not
secure in cable clamp
or comes into contact
with chamber wall
13. The device is failing
cycles.
14. The device takes too
long to warm up
between cycles
15. I cannot locate the
serial number for
trophon EPR
®
trophon EPR User Manual – USA/Canada
switch and back ON (Figure 4, item 10)
The device should then automatically unlock the chamber
door.
 If the above are not successful, power OFF the device,
and follow section B5.3 for the manual door lock
override. Close the Chamber door before powering the
trophon EPR ON again.
 Refer to trophon Validated Probes list to confirm probe
compatibility with trophon EPR.
 Contact your customer service representative.
 Record any error codes and colour of the indicator and
contact your customer service representative.
 Ensure that the probe is removed immediately after the
end of each cycle.
 The trophon EPR serial number can be located on the
back label of your device and also on the side label
above the power socket.
L00035 1.0 03/2014
25