Stahlwille Standard MANOSKOP 720 Nf/80 Manual Del Usuario página 28

EN

The measuring element is a flexible
rod. The flexible rod is not
pretensioned so it is only under
tension from the start to the end of
the actual tightening operation until
the wrench cuts out.

As soon as the torque wrench is
released, it is ready for the next job.

These wrenches will only tighten in
one direction. To use the
MANOSKOP
turn it over.

If necessary, these torque wrenches
can be readjusted without
dismantling.
Maximum permissible deviation of the
set value from the absolute value at cut-
out is ± 4 %.
MANOSKOP
721 Nf/100 and 730/80 comply with
DIN EN ISO 6789, Type II, Class A.
Every MANOSKOP
number and is supplied with a calibration
certificate.
STAHLWILLE Standard
MANOSKOP
... has a permanent, fixed head with an
exchangeable 20 (3/4'') square drive.
STAHLWILLE Standard
MANOSKOP
... has a permanent, non-switchable
ratchet with an exchangeable 20 (3/4'')
square drive.
STAHLWILLE Standard
MANOSKOP
... has a permanent, non-switchable
ratchet with an exchangeable 20 (3/4'')
square drive.
28
®
wrench for loosening,
®
720 Nf/80, 721 Nf/80,
®
has a unique serial
®
720 Nf/80 ...
®
721 Nf/80 ...
®
721 Nf/100 ...