Stahlwille Standard MANOSKOP 720 Nf/80 Manual Del Usuario página 32

EN
AT T E N T I O N !
Impermissible deviation from the
triggering accuracy leads to a risk
of material damage.
 Make sure that the triggering
accuracy is checked at the
prescribed intervals and is
adjusted if required.
Unless otherwise indicated in the user's
internal regulations (e.g. test equipment
inspection to ISO 9000 et seq), an
inspection must take place after approx.
5000 operations or every 12 months,
whichever is the shorter. The time frame
(12 months) starts with the first usage.
If an inspection shows that there is
excessive deviation, the torque wrench
will have to be readjusted (see page 43).
Additional important safety
points ...
... may apply depending on the
application. These are found in the
appropriate sections marked with danger
symbols.
Operation
MANOSKOP
721 Nf/100 und 730/80 are measuring
instruments and must be treated with
utmost care. Avoid subjecting the tool to
physical knocks, chemicals or excessive
temperatures beyond the limits given in
these instructions.
Please note that extremes of climate
(cold, heat, humidity) may affect
measuring accuracy.
32
®
720 Nf/80, 721 Nf/80,