Stahlwille Standard MANOSKOP 720 Nf/80 Manual Del Usuario página 30

EN
Important safety
instructions
Intended Purpose
MANOSKOP
721 Nf/100 und 730/80 have been
designed for controlled tightening of
screw joints. They may only be used for
this purpose. To do so, the correct
attachments must be used with the
torque wrench.
MANOSKOP
used with the grip tube in position.
Otherwise the readings will not be
accurate.
The „intended purpose" includes full
adherence to the information contained
in this instruction booklet, in particular the
safety instructions and technical
tolerance limits. The buyer is required to
ensure that all users comply with these
instructions.
Any use beyond the use described here
is in breach of the intended purpose.
The buyer and user are responsible for
any damage or injury resulting from non-
adherence to these instructions.

MANOSKOP
721 Nf/100 und 730/80 have not
been designed for tightening of
screw joints under series production
conditions. This might lead to
inaccurate readings as a result of
excessive wear in the switching
mechanism.

The MANOSKOP
as a hammer. This will lead to injury
and damage.
30
®
720 Nf/80, 721 Nf/80,
®
721 Nf/100 may only be
®
720 Nf/80, 721 Nf/80,
®
may not be used