Stahlwille Standard MANOSKOP 720 Nf/80 Manual Del Usuario página 29

The wrench consists of a basic wrench
and a grip tube. The grip tube is placed
over the end of the basic wrench where it
locks in place by means of a locking pin
that locates in a hole. The locking pin is
attached to the grip tube by a spring-
loaded ring. To attach or remove the grip
tube (e.g. for setting), press the ring
against the wall of the tube which will
extract the locking pin. The locking
position is marked with an arrow.
STAHLWILLE Service
MANOSKOP
... can be fitted with various shell tools.
For this purpose, the head of the wrench
has an external 24.5x28 square drive
pointing forwards with a spring-loaded
locking pin on the underside. The shell
tools can be attached in the „normal"
position or rotated through 180°.
Technical
specifications
MANOSKOP
Torque range
Exchangeable square
drive
Length 
Weight
 length to centre of square drive
 with grip tube attached
Torque range
[N·m]
Model
730/80 160–800 120–600
®
®
720 Nf/80
[N·m] 160–800
[ft·lb] 120–600
[mm] 20 (3/4'')
[mm]
[g]
MANOSKOP
shell square
[ft·lb]
730/80 ...
720 and 721
721 Nf/80
160–800
120–600
fixed ratchet
20 (3/4'')
1.013 1.013
6.135 6.770
®
730
drive
[mm]
24,5 x 28
721 Nf/100
200–1000
150–725
ratchet
20 (3/4'')
1.466
7.570
Length Weight
[mm] [g]
970 4.960


29