Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
4.3 LEDS
LED
Function
PWR
Power status
SYS
System status
ETH
Status Ethernet
WiFi
Wi-Fi status
BT 0/1
Bluetooth status
4G
4G status
AC
AC online status
4.4 INFRASTRUCTURE
The infrastructure for the Cassia X2000 gateway consists of three critical points: gateway power supply, gateway
connection to the internet, and gateway connections together with the Bluetooth sensors. Next, we will break
down each of these three points.
NOTE!
Use this section when making infrastructure decisions, as such decisions will define the installation
steps you must follow.
12 | Gateway Cassia X2000
Table 4.3: Descriptive table of the LEDs of the Cassia X2000 Gateway
Status
Off
Power off
On
Power on
Off
The system did not start or cannot operate properly
On
The system is starting, resetting, or cannot operate properly
Flashing slowly
The system is operating properly
Off
No Ethernet connection
On
Active Ethernet connection
Flashing
Sending or receiving data
Off
Wi-Fi has not started or is disabled
On
Wi-Fi is operating properly in the hotspot mode or client mode
Flashing
Sending or receiving data
Off
Bluetooth chip has not started
On
Bluetooth chip is operating properly
Flashing fast
Bluetooth connection established
Flashing slowly
Bluetooth scan enabled
USB cellular modem is not connected to the X2000, or cellular modem
Off
is not operating properly
1: PPoE cellular modem*: X2000 connected to the cellular modem NOTE:
On
Cellular network connectivity is not guaranteed
1: PPoE cellular modem*: X2000 is sending or receiving data from the
cellular network
Flashing
2: DHCP cellular modem*: X2000 is sending or receiving data to/from
the cellular modem
Off
X2000 is disconnected from AC
On
X2000 is connected to AC
Description
Publicidad
