5.2.2 Via Ethernet
To access the home page via Ethernet, the gateway must be connected to a computer via an ethernet cable.
Also, the computer in question must be configured to communicate with a 192.168.40.0/24 network, as the fixed
IP of the gateway home page will be at the IP address 192.168.40.1.
NOTE!
If you are using the PoE power supply included in the Cassia X2000 gateway box, connect the
computer Ethernet cable to the RJ45 marked as "IN" of the PoE power supply. Thus, the Ethernet
cable being used to power the gateway will also be used to transmit data between the gateway and
the computer.
ATTENTION!
Do not connect the computer to the RJ45 connector indicated as "OUT" of the PoE charger included
in the Cassia X2000 product. If connected, the computer may be damaged by the high supply voltage.
Figure 5.4: Illustrative image of the RJ45 connectors of the charger included in the Cassia X2000 product
5.2.3 Home Page Password Registration
Once the IP address 192.168.40.1 has been accessed through a browser of the user's choice, a screen will appear
asking to update the access password. In the "Old password" field, enter the password "admin". In the "New
password" and "Confirm password" fields, enter a password of your choice. This password will be used whenever
accessing the gateway settings screen locally.
By clicking "Login", the new password will be saved, and you will return to the home screen. On the home screen,
use the user "admin" and the password previously registered.
Figure 5.5: Password update screen
Gateway Setup
Figure 5.6: Login screen
Gateway Cassia X2000 | 25