Maintenance; Cleaning; Metrological Verification; Repair - Chauvin Arnoux Y2N Manual De Instrucciones

The instrument contains no parts that can be replaced by personnel who have not been
specially trained and accredited. Any unauthorized repair or replacement of a part by an
"equivalent" may gravely impair safety.
5.1

Cleaning

The clamp must be disconnected from all electrical sources and not enclose a cable.
Do not subject the clamp to running water.
■ ■ ■ ■ ■ Keep the jaw faces perfectly clean. The jaw faces must be cleaned with a lightly oiled soft cloth.
■ ■ ■ ■ ■ Clean the case with a cloth slightly moistened with soapy water.
Rinse with a dry cloth. Then dry quickly with a cloth or in a hot air stream ( 80 °C max.)
5.2

Metrological verification

Like all measuring or testing devices, the instrument must be checked regularly.
This instrument should be checked at least once a year. For checks and calibrations, contact one of
our accredited metrology laboratories (information and contact details available on request), at our
Chauvin Arnoux subsidiary or the branch in your country.
5.3

Repair

For all repairs before or after expiry of warranty, please return the device to your distributor.
Our guarantee is applicable for twelve months after the date on which the equipment is made available
(extract from our General Conditions of Sale, available on request).

5. MAINTENANCE

6. WARRANTY

17