MBM CPE94T Manual De Uso E Instalación página 41

TROUBLESHOOTING
Whenever the appliance does not work properly, try to solve the less
serious problems using this table.
FAULT
The appliance does not
turn on.
Water does not reach the
pasta cooker tank.
Water does not drain
from the cooking
compartment.
The inner walls of the
tank are covered with
limestone.
The cooking
compartment is stained.
The light indicators do
not turn on.
If the problem cannot be resolved, turn the appliance off, disconnect it from
the electrical mains and shut all the supply valves. Then contact authorized
customer service.
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
The master switch is not
•
connected.
The residual current de-
•
vice or circuit breaker
has tripped.
The waterworks
•
valve is shut.
The drain is clogged.
•
The water is too hard;
•
the softener is finished.
Quality of the water.
•
Ineffective detergent.
•
Insufficient rinsing.
•
The master switch is not
•
connected.
The residual current de-
•
vice or circuit breaker
has tripped.
- 19 -
MAINTENANCE
INTERVENTION
Connect
•
switch.
Call technical authori-
•
zed service
gate Open the waterworks
•
gate valve.
Call technical authori-
•
zed service: Clean the
drain filter; Free the drain
from residues.
Connect the appliance to
•
a water softener.
Regenerate the water
•
softener.
Descale the
•
compartment.
Filter the water (
•
chnical authorized ser-
vice)
Use the recommended
•
detergent.
Rinse once again.
•
Connect
•
switch.
Call technical authori-
•
zed service
8.
EN
the master
cooking
Call te-
the master