Diamond MIV-40 Manual De Instrucciones página 24

CHAP. 3. SAFETY INSTRUCTIONS
INTRODUCTION
The lacked standards and safety procedures applications can be danger and damage sources.
The machine means bound in the use for the respect, on behalf of the final user, of:
1. all rules, of insertion in the environment and of people behavior, fixed from the laws and/or applicable
standards; with particular reference to the fixed plant upstream of the supplied machine and for its
connection / functioning;
2. All further instructions and use warnings making part of the technical / graphic documentation annexed
to the same machine.
Except where differently specified, the personnel which performs the installation interventions,
connection, maintenance, reassembly, and reuse, damages or breakdowns, demolition and dismantling
must be a skilled personnel qualified in safety matter and educated on the residual risks, with the
competencies, in safety matter, of the maintenance employees.
ENVIRONMENTS, WORKING AND PASSING PLACES
The work environment must answer to the directive 89/654/CEE requirements. In the working area foreign object must not be
present. The employer, in the directive 89/391/CEE respect, concerning the measures realization turned to promote the safety
and workers health improvement during the work, must provide to eliminate or reduce the showed residual risks as foreseen in
the present manual.
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL, INTERVENTIONS ON BROKEN/WORN
PARTS
For any occasion the operator must not try to open or remove a fixed protection or tamper a safety
device.
In the phase of equipment, maintenance, tools change and cleaning, and during all further manual
operations that happens introducing the hands or other body parts in the machine dangerous areas, a residual
risk remains due above all to:
Knocks with machine manufacturing parts,
1.
Grazing and/or abrasion with machine rough parts,
2.
Sharp pain with the sharpened parts
3.
4. Cut with tools sharpened parts.
Besides in the cleaning phase or unblock of the inserted pieces in the blades that happens also introducing
the hands near the cutting tools, a residual risk remains due above all to a cut with tools sharpened parts.
Besides, the operator and the maintenance man must be skilled for the intervention connected to the
manual operations with open protections, must be trained on the joined consequent risks and must be
authorized from a responsible person and must use adequate individual protection devices, five fingers anti
cutting gloves. All interventions on the discs must happen keeping them with the blades towards the
bottom side.
CHAP. 4. PUT ON SERVICE AND USE
The machine management is allowed only to the authorized personnel and opportunely educated and endowed
of a sufficient technical experience.
Before to switch on the machine perform the following operations:
Read with attention the technical documentation,
Know what protections and emergency devices are available on the machine, their location and
functioning.
The not authorized use of commercial parts and accessories making part of the protections and safety devices
can cause some malfunctions and the ranger situation beginning for the operators. The operator must besides
have received an adequate training.
,
Pag. di
8 13