Publicidad
Idiomas disponibles
Idiomas disponibles
For any intervention type or for the parts change that are damaged, activate the maintenance service. The possible change
must happen with manufacturer original products or at least of quality, safety and equivalent characteristics. For analysis
contact the Authorized Assistance Center.
PUT IN FUNCTION
The machine operator can put in function the machine following in order the under reported indications:
1.
Positive controls result for the preparation preliminary operations,
2.
Positive controls result for the electric feeding,
3.
Plug connection in opportune current socket,
4.
Positive controls result for the assembly,
5.
Positive controls result / checks before the starting,
6.
Positive controls result finalized to check the respect of all safety
conditions,
7.
Introduce manually the feed product inside the pot,
8.
With the use of both the hands take the machine in the foreseen zones:
a.
Place it with the tool inside the pot,
b.
Start, maintain and handle it up to the end of the feed product
work,
9.
When the food product has reached the desired solidity, stop the machine
and placed on a support adequate bench,
10.
Discharge manually the pot feed product, taking it with both the hands and
pouring out the feed product where necessary.
It is recommended to make not work the machine on vacuum.
SWITCHING OFF
In succession, the switching off must follow what here under indicated:
1.
Before the switching off wait the working conclusion, or wait that the feed product has reached the desired solidity,
2.
Stop the machine releasing the foreseen control devices,
3.
Place the machine on a support adequate bench
4.
Disconnect the plug from the machine from the feeding socket,
5.
Perform the cleaning interventions.
CHAP. 5. MAINTENANCE, BREAKS RESEARCH AND CLEANING
MAINTENANCE PRESCRIPTIONS
INSULATION FROM THE EXTERNAL FEEDING SOURCES
Before to perform any operation of maintenance, cleaning and parts change, the external feeding sources must be sectioned
and insulated.
Position on "zero" the protection device placed upstream of the electric
equipment feeding line.
Disconnect the general sectioning device and provide to protect
the plug with proper systems.
Pag.
di
11
13
Publicidad
