Prop-Stand; Instructions For The FI Rst Start-Up - SHERCO XY 125 Manual De Propietario

Prop-stand

Instructions for the fi rst start-up
- Check that your SHERCO Dealer has provided you with all the documentation.
- Make sure you have read and understood the instructions set out in the user manual provided.
- Make a note of the chassis, engine and key numbers in this user manual (Page 38).
- Adjust the control instruments as required.
- Check the quantity of fuel.
- Check that the tyres are in good condition (Condition of the tyres Sect.)
- Check that the drive chain is in good condition (Adjusting the chain tension Sect.)
- Check that the braking system is in good condition and working properly (discs, front brake
lever and rear brake pedal).
- Check the condition of the clutch lever.
- Check that the headlight, turn indicators, sidelight and horn are working properly.
The prop-stand is located behind the right-hand
footrest.
It is fi tted with a spring to aid in folding.
ATTENTION
During the folding operation it can be damaged.
The stand will fold by itself after passing the half
way point.
WARNING
NEVER travel with the prop stand down.
Unfold the prop stand onto fl at and fi rm surfaces.
45 45