Maintenance Processes; Seat; Position Of The Front Brake Lever - SHERCO XY 125 Manual De Propietario

Seat

A

Position of the front brake lever

A
ATTENTION
The hand should be in a relaxed po-
sition and able to apply pressure on
the lever.
50 50

Maintenance processes

A
B
To remove the seat:
- Remove the 2 side bolts
- Slide the seat backwards to release the front
B
centre bolt .
To refi t, proceed in reverse order to removal.
- Anchor the front seat to the centre bolt at the
B
front .
- Refi t the 2 side bolts
ATTENTION
Keep the seat clean and in good condition to pre-
vent slipping.
In order to be able to pull on the lever properly du-
ring the braking operation, the position of the lever
needs to be adapted to the physique of the rider.
To alter the position:
- Loosen the 2 screws
A
assembly .
- Sit on the seat.
- Place your feet on the footrests.
- Place your hand on the lever and position it as
desired.
- Secure the position by tightening the two
A
screws .
To change the distance between the lever and the
throttle twist-grip:
- Screw or unscrew the threaded screw
Turn to the right for a SHORTER DISTANCE.
Turn to the left for a LONGER DISTANCE.
WARNING
After changing the position, check and adjust the
play in the front brake.
A
from the rear.
A
at the rear.
A
on the lever-reservoir
B
.