Adjusting The Shock Absorber; Condition Of The Brake Discs - SHERCO XY 125 Manual De Propietario

Adjusting the shock absorber

A
B

Condition of the brake discs

60 60
Maintenance processes
Spring compression:
The ring is used to adjust and set the position in
order to change the preload on the spring.
Turn to the right for:
Turn to the left for:
Hydraulic compression:
Turn to the right:
Turn to the left:
The wear on the thickness of the discs is produ-
ced in the area of contact between the disc and the
brake pads.
Avoid riding the machine if the wearing area is not
greater than 2.7 mm.
- Toothed and threaded ring
MORE PRESSURE.
LESS PRESSURE.
Tightening or loosening the screw at the top ad-
justs the hydraulic speed in both the compres-
sion and extension of the shock absorber.
- Tightening or loosening the screw
To make it STIFFER.
To make it SOFTER
ATTENTION
A
.
B
.