Adjusting The Chain Tension - SHERCO XY 125 Manual De Propietario

Adjusting the chain tension

B
C
The chain must be given special attention because
A
the life of the sprocket assembly, crown wheel and
the chain itself depends on its good maintenance.
The area
to the tensioner, as shown in the image.
The vertical play of the chain in the area where the
tensioner acts should be between 10 and 15 mm
Place the motorcycle in an upright position and im-
mobilise it at the front.
E
The position of the two eccentric adjusters should
be symmetrical to ensure proper alignment be-
tween the wheel sprocket and the drive sprocket.
D
Check the condition and tension of the chain ten-
sion and its greasing regularly. See Maintenance
table.
A
for checking the chain tension is next
WARNING
To make the adjustment:
B
- Loosen the nut and the wheel shaft
the wheel.
- Turn the 2 eccentric adjusters
trically until the proper chain tension is obtained.
WARNING
WARNING
WARNING
A
.
E
from
C D
and symme-
65 65