Démonter et remonter la roue avant
B
WARNING
Place the motorcycle in an upright position and im-
mobilise it at the rear.
To remove the front wheel:
- Remove the bolt
A
Remove the wheel shaft
-
To refi t the front wheel:
- Proceed in reverse order to the removal.
During the process do not press the brake lever. If
the lever has been pressed, the callipers will have
to be pushed back to make them re-separate. If ne-
cessary, refi ll with brake fl uid and bleed the corres-
ponding circuit.
WARNING
Take care when inserting the wheel to ensure that the
disc is not damaged by the brake pads.
Once everything is fi tted, check the correct brake
operation before riding the machine.
A
from the right fork.
TIP
B
.
63 63