Position Of The Clutch Lever; Changing The Headlight Bulb - SHERCO XY 125 Manual De Propietario

Position of the clutch lever

A
ATTENTION
The hand should be in a relaxed po-
sition and able to apply pressure on
the lever.

Changing the headlight bulb

B
In order to be able to pull on the lever properly du-
ring the clutch release operation, it is essential that
the position of the lever is adapted to the physique
of the rider.
To alter the position:
- Loosen the 2 screws
sembly.
- Sit on the seat.
- Place your feet on the footrests.
- Place your hand on the lever and position it as
desired.
- Secure the position by tightening the two
screws
WARNING
After changing the position, check and adjust the
clutch cable.
ATTENTION
A
This operation should be performed with the igni-
tion off.
Removal:
- Remove the central screw
centre.
- Remove the two headlight plate rubbers
- Tilt it forwards.
A
on the lever-switch as-
A
.
A
located in the top
B
.
51 51