Keysight Technologies U8030A Serie Manual De Instrucciones página 30

1 Introduction
Display screen
The display annunciators of your power supply are described in this section.
Figure 1-6
Table 1-4 LCD display legends and descriptions
Legend
1 M1
2 M2
3 M3
t
4
5 LOCK
6 LIMIT
7 OFF
8 88.88 V
9 8.88 A
10 88.88 V
11 8.88 A
30
The LCD display at a glance
Description
Stores the current power supply operating state in the power supply non-volatile
memory.
When the power supply is in the calibration mode, these states can be used to
store the calibration constants.
When the t annunciator is steady, the single memory output operation is active.
When the t annunciator is blinking, the loop memory output operation is active.
Front panel operation is disabled.
The voltage and current limit values are shown in the display.
All the power supply outputs are disabled.
Line 1: Voltage and current values display for Output 1.
Line 2: Voltage and current values display for Output 2.
Keysight U8030A Series User's Guide