Keysight Technologies U8030A Serie Manual De Instrucciones página 41

When you press the [Display Limit] button, the voltage and current limit values
NOTE
will be shown on the display for about five seconds. If there is no activity
detected, the display will return to the meter mode.
5 Adjust for the desired voltage limit.
6 Adjust for the desired output current.
7 Return to the meter mode.
8 Enable the output.
Verify that the power supply is in the constant current mode. Ensure that the
NOTE
constant current (CC) annunciator is on. If the constant voltage (CV) annunciator
is on instead, choose a higher voltage limit.
Keysight U8030A Series User's Guide
– Press the [Voltage/Current] button if necessary until the V annunciator
blinks.
– While the V annunciator is blinking, turn the knob to adjust for the desired
output voltage value.
– Press the [Voltage/Current] button if necessary until the A annunciator
blinks.
– While the A annunciator is blinking, turn the knob to adjust for the desired
current limit value.
– Press the [Display Limit] button to return to the meter mode.
– The LIMIT annunciator turns off.
– Press the [Output 1 On/Off] or [Output 2 On/Off] button to enable the
output.
– The OFF annunciator turns off and the CC annunciator turns on for the
corresponding output.
– The display is now in the meter mode.
Operation and Features 2
41