Keysight Technologies U8030A Serie Manual De Instrucciones página 45

Output On/Off Operation
The following steps show you how to turn on all outputs at the same time or to
turn on each output individually.
Turn on or off all outputs
When the power supply is turned on, all outputs (Output 1, Output 2, and the 5 V
output) are disabled by default.
1 Enable all outputs at the same time.
2 Disable all outputs at the same time.
If all the outputs are disabled, pressing the [All On/Off] button will enable all the
NOTE
outputs.
Keysight U8030A Series User's Guide
– Press the [All On/Off] button to enable all the outputs in a single button
press.
– The OFF annunciator turns off.
– The display shows voltage and current values for Output 1 on line 1 and
Output 2 on line 2.
– The 5 V annunciator turns on.
– If any of the outputs are enabled, pressing the [All On/Off] button will
disable all the outputs.
Operation and Features 2
45