Keysight Technologies U8030A Serie Manual De Instrucciones página 39

4 Adjust for the desired output voltage.
5 Adjust for the desired current limit.
6 Return to the meter mode.
7 Enable the output.
Verify that the power supply is in the constant voltage mode. Ensure that the
NOTE
constant voltage (CV) annunciator is on. If the constant current (CC) annunciator
is on instead, choose a higher current limit.
Keysight U8030A Series User's Guide
– Press the [Voltage/Current] button if necessary until the V annunciator
blinks.
– While the V annunciator is blinking, turn the knob to adjust for the desired
output voltage value.
– Press the [Voltage/Current] button if necessary until the A annunciator
blinks.
– While the A annunciator is blinking, turn the knob to adjust for the desired
current limit value.
– Press the [Display Limit] button to return to the meter mode.
– The LIMIT annunciator turns off.
– Press the [Output 1 On/Off] or [Output 2 On/Off] button to enable the
output.
– The OFF annunciator turns off and the CV annunciator turns on for the
corresponding output.
– The display is now in the meter mode.
Operation and Features 2
39