Keysight Technologies U8030A Serie Manual De Instrucciones página 49

Memory Output Operations
The Memory Output feature allows operating states from the M1, M2, and M3
memory locations to be recalled automatically in sequential order.
Three time intervals are programmable:
– t
– t
– t
Enable the memory output single operation
1 Enable the memory output single operation.
Keysight U8030A Series User's Guide
— time delay between recalling M1 and recalling M2.
1
— time delay between recalling M2 and recalling M3.
2
— time delay between recalling M3 and recalling M1.
3
– Press and hold the [Memory Output] button. The display shows HOLd until
the memory output operation is enabled.
– The t annunciator turns on, and all the M1, M2, and M3 annunciators turn
on.
– The operating state from M1 memory location is recalled immediately.
– The M1 annunciator blinks. The M2 and M3 annunciators are steadily on.
– After waiting for t
recalled.
– The M2 annunciator blinks. The M1 and M3 annunciators are steadily on.
– After waiting for t
recalled.
– The M3 annunciator blinks for two seconds. The M1 and M2 annunciators
are steadily on.
– The memory output operation is completed.
– The t annunciator turns off, and all the M1, M2, and M3 annunciators turn
off.
, the operating state from M2 memory location is
1
, the operating state from M3 memory location is
2
Operation and Features 2
49