Keysight Technologies U8030A Serie Manual De Instrucciones página 57

Clear the overcurrent condition
The OCP trip can only occur if the corresponding output is enabled. When the
OCP trip occurs, the corresponding output is disabled automatically.
– If the OCP trip occurs on Output 1, the display shows triP on line 1 and the
– If the OCP trip occurs on Output 2, the display shows triP on line 2 and the
1 Select the output channel with the OCP trip.
2 Clear the OCP trip.
If the OCP trip persists, decrease the current limit settings to clear the tripping.
NOTE
Keysight U8030A Series User's Guide
OCP1 annunciator blinks.
OCP2 annunciator blinks.
– Press [1] to select Output 1, or
– Press [2] to select Output 2.
– The corresponding annunciator (OUT1 or OUT2) turns on.
– Press the [Over Current] button again to clear the OCP trip.
Operation and Features 2
57