Publicidad
Idiomas disponibles
Idiomas disponibles
en-us Installation
5 Installation
Installation
Installation
WARNING
Before installing, turn power OFF at the service panel.
Lock service panel to prevent power from being turned ON accidentally.
▶
5.1 Preparing the ceiling cutout and housing
The appliance must be mounted to the surrounding
¡
housing. See the section on installation requirement
and clearances for determining the installation height.
→ Page 7
When calculating the load for the housing support
¡
system, be sure to include the weight of the ventilation
unit. → Page 8
Ceiling cutout and supporting housing dimensions
SKU
Dimension for A
VCIN36GWS
32¹⁵⁄₁₆" (836 mm)
VCIN42GWS
38¹⁵⁄₁₆" (989 mm)
VCIN48GWS
44¹⁵⁄₁₆"(1141 mm)
VCIN54GWS
50¹⁵⁄₁₆" (1294 mm)
14
Build the housing in accordance with the dimensions
¡
noted in the section on Ceiling cutout and supporting
stud housing dimensions. → Page 14
For optimal performance, the hood should be mounted
¡
flush against the back wall. In such installations, the
rear trim piece may not be necessary.
For installations of ½" – 3" (13 – 76 mm) from the back
¡
wall, the rear trim piece can be used.
SKU
Dimension for A
VCIN60GWS
56¹⁵⁄₁₆" (1446 mm)
Publicidad
