Thermador Professional VCIN36GWS Manual De Instrucciones página 7

3 Installation requirements and clearances Installation requirements and clearances
Installation requirements and clearances
3.1 Appliance dimensions
This model series features filters, LED lights, and side trims.
Model Dimension A
VCIN36WS 32⅜" (822 mm)
VCIN42WS 38⅜" (974 mm)
VCIN48WS 44⅜" (1127 mm)
VCIN54WS 50⅜" (1280 mm)
VCIN60WS 56½" (1435 mm)
Notes
The transition is centered horizontally.
¡
For optimal performance, the hood should be mounted
¡
flush against the back wall. In such installations, the
rear trim piece is not necessary. For installations of ½"
– 3" (13 – 76 mm) from the back wall, the rear trim
piece can be used.
IMPORTANT: The hood needs to be centered over the
cooking surface for best performance.
Dimension B Dimension C
With rear trim piece
33¾" (857 mm) 7⅜" – 10⅜" (187 – 264 mm) 6⅝" – 9⅝" (168 – 245 mm)
39¾" (1010 mm) 7⅜" – 10⅜" (187 – 264 mm) 6⅝" – 9⅝" (168 – 245 mm)
45¾" (1162 mm) 7⅜" – 10⅜" (187 – 264 mm) 6⅝" – 9⅝" (168 – 245 mm)
51¾" (1315 mm) 7⅜" – 10⅜" (187 – 264 mm) 6⅝" – 9⅝" (168 – 245 mm)
57¾" (1467 mm) 7⅜" – 10⅜" (187 – 264 mm) 6⅝" – 9⅝" (168 – 245 mm)
3.2 Clearances
The custom insert hood is designed for installation inside a
custom-built hood assembly.
This appliance requires the ducting to be vented to the
outside. It cannot be used in conjunction with a
recirculation unit.
Installation requirements and clearances en-us
Dimension C
Without rear trim piece
7