Connecting And Removing The High-Pressure Hose - Stihl RB 600 Manual De Instrucciones

3
Attach the handle (3) to the spray
N
gun (2)
Suction hose for detergent
Attach the suction hose for
N
detergent (1) to the low-pressure
connector (2) on the pump
RB 600
Storing accessories
2
2
1
Place the spray attachment in the
N
holder on the frame
Hang the high-pressure hose on the
N
holder on the frame
Insert the high-pressure nozzles in
N
the holders on the frame
Connecting and Removing
the High-Pressure Hose
WARNING
To reduce the risk of severe injury from
high pressure spray, always shut off the
pressure washer and relieve any
remaining pressure in the line by
squeezing the spray gun trigger before
attempting to remove the high-pressure
hose from either the pump or the spray
gun.
Remove all sand and debris from
N
the connections
Connection to the high-pressure pump
Connecting
1
Push back the coupling sleeve (1)
N
as far as it will go and hold it there
Push the high-pressure hose (2) as
N
far as it will go into the coupling
Pull the coupling sleeve forward as
N
far as it will go
Pull the high-pressure hose and
N
confirm that it is seated securely
English
2
13