c)
Use caution and common sense when operating this unit. A moment's
inattention during operation may result in serious personal injury.
d)
Use personal protective equipment as required when operating the unit as
specified
The use of appropriate, approved personal protective equipment reduces the
risk of injury.
e)
Eye, ear, and respiratory protection is recommended.
f)
The product is not a toy. Children should be watched to ensure that they do
not play with the appliance.
2.3.
Safe use of the device
a)
Do not overload the device. Use tools that are suitable for the application. A
correctly selected product will do a better and safer job for which it was
designed.
b)
Disconnect the pressure hose before making adjustments, changing
accessories, and after working with the equipment. This precaution reduces
the risk of accidents.
c)
Keep unused product out of the reach of children and anyone unfamiliar with
the device or this manual. Products are dangerous when used by
inexperienced users.
d)
Keep the product in good working order. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
e)
Keep the product out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
g)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
h)
When transporting or moving the device from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the device is used.
i)
Clean the device regularly to prevent permanent dirt build-up.
j)
Use air to power the unit, no other gases are allowed.
k)
Use reinforced hoses for the compressed air connection in areas with a high
risk of mechanical damage.
l)
Before each use, make sure that the nozzle is properly mounted in the machine
and that the hose is properly attached and undamaged.
m) The air supplied to the machine should be dehumidified, clean, and free of
contaminants. Contaminants can clog hoses and cause damage to the machine
and its components.
in
Section
1
of
the
explanation
of
symbols.