Publicidad
Idiomas disponibles
Idiomas disponibles
English
3
2
Press down the throttle trigger
N
lockout (1) and squeeze the throttle
trigger (2) at the same time – hold
both levers in that position.
Move the Master Control lever (3) to
N
n and hold it there.
Now release the throttle trigger,
N
Master Control and throttle trigger
lockout in that order. This is the
starting throttle position.
if the engine is cold
4
Move the choke lever (4) to l.
N
32
If the engine is warm
1
Set the choke lever (4) to j . Also
N
use this position if the engine has
been running but is still cold.
Place your saw on the ground.
N
Make sure you have a firm footing –
check that the chain is not touching
any object or the ground.
Bystanders must be well clear
of the general work area of the
saw.
Hold the saw firmly on the ground
N
with your left hand on the front
handle – your thumb should be
under the handle.
Put your right foot into the rear
N
4
handle and press down.
Alternative method of starting:
Hold the rear handle tightly between
N
your legs, just above the knees.
Hold the front handle firmly with
N
your left hand – your thumb should
be under the handle.
Pull the starter grip slowly and
N
steadily with your right hand and
push down the front handle at the
same time. Do not pull out the
starter rope all the way – it might
otherwise break.
Do not let the starter grip snap back.
N
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
MS 192 C
Publicidad
