Descargar Imprimir esta página

Jonsered CS 2234S Manual De Instrucciones página 6

Ocultar thumbs Ver también para CS 2234S:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Dear Customer,
Congratulations on your choice to buy a Jonsered
product!
We are convinced that you will appreciate with great
satisfaction the quality and performance of our product
for a very long time to come. The purchase of one of our
products gives you access to professional help with
repairs and service whenever this may be necessary. If
the retailer who sells your machine is not one of our
authorised dealers, ask for the address of your nearest
service workshop.
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. Think
of this operator ' s manual as a valuable document. By
following its' content (using, service, maintenance etc)
the life span and the second-hand value of the machine
can be extended. If you will sell this machine, make sure
that the buyer will get the operator ' s manual.
Good luck on using your Jonsered machine!
Jonsered has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
6 – English
INTRODUCTION
Symbols on the machine:
WARNING! Chain saws can be
dangerous! Careless or incorrect use
can result in serious or fatal injury to
the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
This product is in accordance with
applicable EC directives.
Noise emission to the environment
according to the European
Community's Directive. The machine's
emission is specified in chapter
Technical data and on label.
Both of the operator ' s hands must be
used to operate the chain saw.
Never operate a chain saw holding it
with one hand only.
Contact of the guide bar tip with any
object must be avoided.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches
an object, and cause a lightning fast
reverse reaction, kicking the guide bar
up and towards the operator. May
cause serious personal injury.
Chain brake, activated (left)
Chain brake, not activated
(right)
Other symbols/decals on the mac hine refer to
special certification requirements for certain
markets.
1154214-26 Rev.4 2012-02-14

Publicidad

loading

Este manual también es adecuado para:

Cs 2238s