imtech iMatJet Instrucciones De Uso página 5

To be considered before each trip To be considered before each trip
Before using your iMatJet Before using your iMatJet ® ® in public waters, please in public waters, please
inform yourself about locally applicable nautical rules inform yourself about locally applicable nautical rules
and regulations. and regulations.
The iMatJet The iMatJet ® ® is a piece of water sports equipment is a piece of water sports equipment
and may only be used by persons who are able to and may only be used by persons who are able to
swim. It may only be driven out as far as you would swim. It may only be driven out as far as you would
be able to swim back. be able to swim back.
The current, high and low tide as well as wind The current, high and low tide as well as wind
conditions must be taken into account when planning conditions must be taken into account when planning
the trip. Inquire about the conditions in advance. the trip. Inquire about the conditions in advance.
Check before each trip: Check before each trip:
Check the charge status of the batteries(for motor housing Check the charge status of the batteries(for motor housing
[20], for remote control [20], for remote control [17] [17] and for powerbank and for powerbank
high-pressure pump supplied). To charge high-pressure pump supplied). To charge
Check the batteries are firmly inserted. Check the batteries are firmly inserted.
Make absolutely sure that the seals Make absolutely sure that the seals
are tight, undamaged and very clean! are tight, undamaged and very clean!
Otherwise water could penetrate and Otherwise water could penetrate and
massively damage the electronics. massively damage the electronics.
The package includes 4 replacement seals. The package includes 4 replacement seals.
Check the housing and protective grille Check the housing and protective grille
damage and foreign bodies. damage and foreign bodies.
Check the antenna cable [19]. Check the antenna cable [19].
Check the valves Check the valves [6] [6] of the mattress, check the air of the mattress, check the air
mattress for leaks. mattress for leaks.
And after every trip... And after every trip...
⚫remove any foreign objects, especially on the protective ⚫remove any foreign objects, especially on the protective
grille, grille, see page 8. see page 8.
⚫If you used the iMatJet ⚫If you used the iMatJet ® ® in salt water, in salt water,
please rinse the mattress with fresh water. please rinse the mattress with fresh water.
Assembly: Inflating the air mattress Assembly: Inflating the air mattress
Before inflating, read the manual "Electric Air Pump Before inflating, read the manual "Electric Air Pump
INFLATE and DEFLATE". Use the supplied powerbank INFLATE and DEFLATE". Use the supplied powerbank
[16] [16] to power the pump. Read the operating to power the pump. Read the operating
instructions carefully! instructions carefully!
Fully lay out the air mattress Fully lay out the air mattress
that there are no sharp objects underneath. that there are no sharp objects underneath.
Place the air mattress with the blue side, Place the air mattress with the blue side,
the lower chamber, facing upwards. the lower chamber, facing upwards.
Open the cap Open the cap
to the left (counterclockwise). Check whether to the left (counterclockwise). Check whether
the valve the valve [6] [6] is in the closed position. The position is in the closed position. The position
can be changed by pushing in and turning. can be changed by pushing in and turning.
[16] [16] for the for the
Insert the pump Insert the pump
see page 6. see page 6.
the adapter the adapter [15] [15]
chamber using pressure of approx 0.103 bar. chamber using pressure of approx 0.103 bar.
[25] [25]
Make sure that there is no dirt in the cover cap Make sure that there is no dirt in the cover cap
and that the safety cord and that the safety cord
Turn the air mattress with the blue side facing Turn the air mattress with the blue side facing
down and repeat the pumping process for the down and repeat the pumping process for the
middle and upper chamber. The pressure for middle and upper chamber. The pressure for
the middle and upper chamber should be a maximum the middle and upper chamber should be a maximum
[31] [31] for for
of approx. 0.069 bar. of approx. 0.069 bar.
Dismantling: Deflating the air mattress Dismantling: Deflating the air mattress
Let iMatJet Let iMatJet dry.
® ®
Drain (use the pump's DEFLATE valve) starting Drain (use the pump's DEFLATE valve) starting
with the upper chamber; as much as possible for with the upper chamber; as much as possible for
easy folding. easy folding.
Fold up and stow away. Fold up and stow away.
You can find video instructions on how to set up You can find video instructions on how to set up
the iMatJet the iMatJet ®
[1] [1] and make sure and make sure
[8] [8] on the valves by turning them on the valves by turning them
[14] [14] into the valve into the valve [6] [6] and turn and turn
clockwise to the right. Fill the lower clockwise to the right. Fill the lower
[8] [8]
[7] [7] is connected to the valve. is connected to the valve.
dry.
® at: www.imatjet.com at: www.imatjet.com
Installing the motor housing Installing the motor housing
Take both drives Take both drives [20] [20] without rechargeable batteries without rechargeable batteries
[23] [23] out of the trolley [11], and attach them to the out of the trolley [11], and attach them to the
mounting plate [9]. Secure both drives with the drive mounting plate [9]. Secure both drives with the drive
fastening [28]. Ensure that the drive cannot be pulled fastening [28]. Ensure that the drive cannot be pulled
out. out.
Secure the connecting cable Secure the connecting cable [21] [21]
the two motor housings with the cable fixing the two motor housings with the cable fixing
on the lower chamber. on the lower chamber.
Check the seals [25], before pushing the batteries Check the seals [25], before pushing the batteries
[23] [23] into the compartment into the compartment [22] [22] of the motor housing. of the motor housing.
The seals must be clean so that water cannot The seals must be clean so that water cannot
penetrate. penetrate.
Remove the protective caps Remove the protective caps [27] [27]
[26] [26] of the batteries. Push the batteries of the batteries. Push the batteries
into the motor housing in the correct position. into the motor housing in the correct position.
Ensure that the batteries are firmly inserted. Ensure that the batteries are firmly inserted.
Secure the batteries with the 4 locking clips [24]. Secure the batteries with the 4 locking clips [24].
Finally, attach the antenna cable Finally, attach the antenna cable
fastening fastening [5] [5] on the left inside of the air mattress. on the left inside of the air mattress.
Switch on the remote control Switch on the remote control [17] [17]
radio connection. If you can see "CONNECTED" on radio connection. If you can see "CONNECTED" on
the display of the remote control, the remote control is the display of the remote control, the remote control is
connected to the drive. Observe the separate operating connected to the drive. Observe the separate operating
instructions of the remote control. instructions of the remote control.
Turn over the assembled iMatJet Turn over the assembled iMatJet ® with ® with
two people, without putting it down and two people, without putting it down and
place it in water with a depth of at least place it in water with a depth of at least
50 cm. 50 cm.
The iMatJet The iMatJet ® ® is now ready to go! is now ready to go!
located between located between
[10] [10]
from the contacts from the contacts
[23] [23]
[19] [19] to the Velcro to the Velcro
and check the and check the
5