Publicidad
GEN
CONTROL FUNCTIONS
INFO
EC150000
CONTROL FUNCTIONS
MAIN SWITCH
Functions of the respective switch positions
are as follows:
ON:
The engine can be started only at this position.
OFF:
All electrical circuits are switched off.
Main switch indicator light
The main switch 1 is equipped with an indica-
tor light 2 to avoid forgetting to turn it off. This
light functions as follows.
• It lights up with the main switch "ON".
• It goes out when the engine increases its
speed after being started.
• It lights up again when the engine is stopped.
NOTE:
If the indicator light will not light up with the
main switch "ON", it shows a lack of the battery
voltage. Recharge the battery.
EC151000
"ENGINE STOP" BUTTON
The "ENGINE STOP" button 1 is located on
the left handlebar. Continue pushing the
"ENGINE STOP" button till the engine comes
to a stop.
START SWITCH
The start switch 1 is located on the right han-
dlebar. Push this switch to crank the engine
with the starter.
1 - 10
Publicidad
Capítulos
