Descargar Imprimir esta página

Assembly And Installation - Yamaha WR450F Manual De Servicio Del Propietario

Ocultar thumbs Ver también para WR450F:

Publicidad

HANDLEBAR
EC5B5000

ASSEMBLY AND INSTALLATION

Handlebar
1. Install:
• Handlebar holder (lower) 1
• Plain washer 2
• Nut [handlebar holder (lower)] 3
NOTE:
• Install the handlebar holder (lower) with its
side having the greater distance a from the
mounting bolt center facing forward.
• Apply the lithium soap base grease on the
thread of the handlebar holder (lower).
• Installing the handlebar holder (lower) in the
reverse direction allows the front-to-rear off-
set amount of the handlebar position to be
changed.
• Do not tighten the nut yet.
2. Install:
• Handlebar 1
• Handlebar holder (upper) 2
• Bolt [handlebar holder (upper)] 3
NOTE:
• The handlebar holder (upper) should be
installed with the punched mark a forward.
• Install the handlebar so that the marks b are
in place on both sides.
• First tighten the bolts on the front side of the
handlebar holder (upper), and then tighten
the bolts on the rear side.
5 - 41
CHAS
28 Nm (2.8 m · kg, 20 ft · lb)

Publicidad

Capítulos

loading

Este manual también es adecuado para:

Wr450fv