Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
Built-In Installation (for the integrated model)
Step 1. Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hose and
power socket.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1. Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to
cabinet.
90 °
Electrical, drain and
water supply line
connection
820mm
600 mm(for 60cm model)
450 mm(for 45cm model)
2. If dishwasher is installed at the corner of the cabinet, there should be some space when
the door is opened.
Dishwasher
Door of
dishwasher
Minimum space
of 50mm
NOTE
Depending on where your electrical outlet is, you may need
to cut a hole in the opposite cabinet side.
16
90 °
80
100
Space between cabinet
bottom and floor
Cabinet
EN
B
Using the appliance
Step 2. Aesthetic panel's dimensions and installation
NOTE
Follow the specific installation instruction for attaching the
aesthetical door panel.
Semi-integrated model
A
Seperate velcro stripe
and velcro stripe
of the aesthetic panel. Attach the felted velcro stripe
A
(see figure
). After positioning of the panel, fix the panel onto the outer door by screws
B
and bolts (See figure
).
A
Velcro stripe
B
1.Take away the four short screws
17
B
and attach velcro stripe
A
on the inner side
B
on the outer door of dishwasher
Velcro stripe
2.Pin up the four long screws
EN
Publicidad
