Publicidad
Idiomas disponibles
Idiomas disponibles
B
Using the appliance
7. Install the furniture door to the outer door of the dishwasher. (Step 7 to Step 10)
8. Adjust the tension of the door springs by using a Philips screw driver turning in a clockwise
motion to tighten the left and right door springs. Failure to do this could cause damage to
your dishwasher. (Step 11)
9. The dishwasher must be secured in place. There are two ways to do this:
A
Normal work surface: Put the installation hook into the slot of the side plane and secure
it to the work surface with the screws.
B
Marble or granite work top: Fix the side with screws.
A
B
20
EN
B
Using the appliance
Step 5. Levelling the dishwasher
Dishwasher must be level for proper dish rack operation and wash performance.
1. Place a spirit level on door and rack track inside the tub as shown to check that the
dishwasher is level.
2. Level the dishwasher by adjusting the three levelling feet individually.
3. When level the dishwasher, please pay attention not to let the dishwasher tip over.
Check level
front to back
Check level
side to side
NOTE
The maximum adjustment height of the feet is 50 mm.
21
UP
DOWN
EN
Publicidad
