VALBERG 4D 511 E DX625C Instrucciones De Uso página 19

B
Using the appliance
3. 0peration instructions
Display
When electrify the refrigerator, the display screen will total display for 3 seconds. Meanwhile
the starting up bell rings and then the screen enters the normal display of the operation.
The first time for using the refrigerator, the default set temperature of refrigerating chamber
and freezing chamber is 5 °C/-18 °C respectively.
When the error occurs, the display shows the error code (see next page); during normal
running, the display shows the set temperature of the refrigerating chamber or freezing
chamber. Under normal circumstances, if there is no operation on display panel or door
opening action within 30s, then the display is Iock, and the sate goes out.
Lock /unlock
In the unlocked state, long press the Iock button for 3 seconds, enter the Iock state.
The logo goes outand buzzer sounds, il means the display panel is locked, at this time,
button operation cannot be implemented;
In the locked state, long press the Iock button for 3 seconds, enter the unlocked state.
The logo lights up and buzzer sounds, it means the display panel is unlocked, at this time,
button operation can be implemented;
Temperature setting of refrigerating chamber
Press temperature adjusting button of the refrigerating chamber to change the
setting temperature of refrigerating chamber, and then each time a press of temperature
adjusting button of the refrigerating chamber, the temperature will be reduced 1 °C;
The temperature setting range for refrigerating chamber is 2-8 °C. When the temperature
is 2 °C, press the button again, and the temperature of refrigerating chamber will be set at
8 °C, and it circulates accordingly.
Temperature setting of freezing chamber
Press temperature adjusting button of the freezing chamber to change the setting
temperature of freezing chamber and then each time a press of temperature adjusting
button of the freezing chamber, the temperature will be reduced 1 °C;
The temperature setting range for freezing chamber is -24 °C ~ -16 °C).
When the temperature is -24 °C, press the button again, and the temperature of freezing
chamber will be set at -16 °C, and it circulates again and again.
Mode setting
When super cool mode is set, temperature of refrigerating chamber will automatically
set at 2 °C; Super cool exits for 6h.
Exit super cool mode , temperature of refrigerating chamber will automatically return
back to temperature set before super cool mode.
When super freezing mode is set, temperature of freezing chamber will automatically
set at -24 °C; Super freezing exits for 24h.
12 EN