Sabo 47-ECONOMY Manual Del Operador página 44

Maintenance and cleaning work may only be carried out on level surfaces
with the engine switched off and the spark plug connector disconnected.
Regular maintenance is essential for safety and top performance.
• Never remove the spark plug connector when the motor is running! Risk: Electric
shock.
• Disconnect the spark plug connector only when the engine has cooled down.
Danger of burns!
• Make sure that the spark plug connector is firmly seated! Risk: Electric shock.
• If the tank has to be emptied, this should be done in the open, and with a
cold engine. Take care to ensure that no fuel is spilt.
For reasons of warranty and safety, only genuine spare parts may be used.
Non-equivalent spare parts can damage the machine and are a safety hazard.
7 DESCRIPTION OF COMPONENTS
47-ECONOMY
47-A ECONOMY
47-ECONOMY, 47-A ECONOMY
1 Safety control bar for motor stop
2 Drive control bar (model-dependent)
3 Tank cap
4 Engine cover
5 Cutting height adjustment
6 Air filter
7 Spark plug
8 Carrying handle
9 Exhaust protection grid
10 Belt drive covers
11 Oil refill neck with dipstick
12 Ejector flap
13 Fast release (depending on the model)
14 Starter cable handle
47-VARIO, 47-VARIO E
1 Safety control bar for motor stop
2 Vario actuation
3 Drive control bar (depending on the model)
4 Tank cap
5 Engine cover
6 Cutting height adjustment
7 Air filter
8 Spark plug
9 Carrying handle
10 Exhaust protection grid
11 Belt drive covers
12 Oil refill neck with dipstick
13 Ejector flap
14 Fast release (depending on the model)
15 Starter cable handle
16 Starter key (depending on the model)
All models
8 PREPARATION
The following unit parts are included in the package for mower assembly:
• Mower with pre-assembled guide bar
• Grass catch, collecting bag frame
• Tool bag containing the following:
– Operator's manual with Declaration of Conformity
– Warranty conditions (depending on model)
– Diverse attachment parts.
Should a part be missing, please contact your professional dealership.
NOTE
Always remove the spark plug connector before fitting the bar and the starter
cable holder. Following assembly, at the latest before starting the engine, push
the spark plug connector back in place.
Raise the handlebar (Illustration A1 + B1 + V4 + E1 )
IMPORTANT
Make sure the throttle cables are not kinked or jammed when lifting the
handlebars.
IMPORTANT
Make sure that the cables are not pinched, squeezed, twisted or overstretched
when the handlebars are folded apart or collapsed! Always run the cables along
6