Publicidad
Idiomas disponibles
Idiomas disponibles
CUSTOM
PROGRAMS
1) Select CUSTOM 1,2 or 3 program using A v
and press ENTER on the
PROGRAMMING
BUTTON.
2) Set time using
,6, v
and press ENTER on the PROGRAMMING
BUTTON.
3)
Set the RESISTANCE
profiles
using
,6, "v" and press ENTER on the PROGRAMMING
BUTTON
after each segment
is set to the desired
level (repeat until all 15 segments
are
set).
4)
Next, set the INCLINE
profiles
using
,6, v
and press ENTER on the PROGRAMMING
BUTTON
after each segment
is set to the desired
level (repeat until all 15 segments
are
set). NOTE:
if BACK is pressed
on the PROGRAMMING
BUTTON,
it will take you back to
previous
segment.
Programming Button
5)
Press START to begin the program.
NOTE: to reset the memory, press and hold ENTER for 5 seconds.
Publicidad
