Description Of The Product; Elements Of The Complete Installation - Erreka RINO Serie Manual Del Instalador

DESCRIPTION OF THE PRODUCT

1

ELEMENTS OF THE COMPLETE INSTALLATION

1 Gate
2 Rack
3 Lower track and guide wheels
4 Upper guide
5 Operator with control panel
6 Magnetic key or proximity key reader
7 Wall pushbutton/key switch
8 Antenna
9 Closing safety photocells
10 Opening safety photocells
11 Mechanical strip
12 Identification plate
13 Traffic light
ELECTRICAL CABLING:
Element
A: Main power supply
B: Flashing light
C: Photocells (Tx / Rx)
D: Pushbutton/wall key
E: Antenna
Fig. 1 Elements of the complete installation

The safe and correct operation of the
installation is the responsibility of the installer.
14 Flashing light
15 Gate stopper
16 Limit switch magnets
Nº threads x section
2
3x1.5 mm
2
2x0.5mm
2 2
2x0.5 mm / 4x0.5mm
2
2x0.5 mm
k
Coaxial cable 50 (RG-58/U)

For greater safety, Erreka recommends installing
photocells (9) and (10) and safety strips (11).
Maximum length
30m
20m
30m
50m
5m
RINO operator for sliding gates
English
47