INSTALLATION
4
ELECTRICAL CONNECTIONS
Complete the installation in line with low voltage regulations and applicable rules.
Use cables with sufficient section, and always earthed.
Check the manufacturer's instructions for all the elements installed.
Electrical connections
R.E
Plug-in receiver
ANT
Cable connectors for antenna
SMF
Traffic light card AEPS1-001
FCC
Magnetic closing limit switch (reed)
FCA
Magnetic opening limit switch (reed)
A.T
Total opening key command
A.P
Pedestrian opening key command
SG.A
Opening safety device (mechanical strip or
photocell)
SG.C
Closing safety device (mechanical strip or
photocell)
56
Installation Guide
(photocells without testing)
(photocells with testing)
AUX
Output (24Vdc, 300mA)
Constant output in order to feed peripheral
devices (photocells without testing)
FT
24Vdc Output for photocell testing
STOP
Emergency pushbutton
LG
Garage light
(230Vac: max. 2,300W resistive)
(125Vac: max. 1,250W resistive)
DEST
Flashing light
(125/230Vac, max. 60W)
E1
A1 Operator encoder cable connectors